Wear protective military-style

Protective clothing used in the army and the civil defense, is one of individual means of protection of personnel from lethal weapons used by the enemy poisonous, radioactive substances, light radiation of nuclear explosions, incendiary substances, toxic fluids and other aggressive chemicals, as well as when working in epidemiological center.
Protective clothing is divided into two types: insulating and filtering. Insulating protective clothing, made of rubberized fabric or synthetic films provides almost complete isolation of the organism from the environment, and to prevent the defeat of the people of toxic and poisonous substances when they are hit on the clothes drop-liquid or aerosol state. Insulating protective clothing is used when the actions of the personnel on the infected S, RV areas, carrying out rescue and special works for degassing, decontamination area, property, equipment, arms, and when working with toxic fluids and corrosive substances. On the supply of troops and civil defense as an insulating protective clothing are mostly used combined protective kit and light protective suit or overalls.

OZK
Fig. 7. Combined protection; the use of the cloak in the form of overalls.

Fig. 8. Protective suit: 1 - coverall (overall view); 2 - liner; 3 - rubber boots; 4 - gloves. Fig. 9. Light protective suit: 1 - shirt with a hood; 2 - liner; 3 - pants-stockings; 4 - gloves.

Combined protective kit (PCD) consists of a protective cloak, protective stocking and protective gloves (Fig. 7). The coat can be used in a Cape or overalls.
Light protective clothing and protective suit (Fig. 9 and 8) provide better seal than the combined arms protective kit and have a higher protective properties of the pairs with standard and aggressive substances. Therefore, they are special units for performing especially important works on decontamination (see), decontamination (see). To suit made of rubber boots and gloves, as well as liner, to suit two-toed gloves and a cap.
Insulating protective clothing is made in several sizes (from 3 to 5), corresponding to growth of servicemen.
In the conditions of stay of the person in insulating clothes greatly disturbed teploregulyation of the body, which can result in high ambient temperature to the overheating of the body and the emergence of heat stroke (see).
To prevent overheating of the body have the following allowable time personnel in insulating protective clothing: at temperatures between 15 and 19 degrees to 1,5-2 hours, 20-24 degrees to 40-50 minutes, 25-29 degrees to 30 minutes, from 30 degrees and up no more than 20 minutes To reduce the temperature in podkoshyona space over protective clothing wear suits made of cotton, periodically wetted with water. Through evaporation of water temperature in podkoshyona space decreases with the increase in the length of stay of personnel in protective clothing.
At low ambient temperatures insulating protective clothing worn over the dress.
As protective clothing filter type is used clothing or linen, impregnated with special substances (impregnation), neutralizing pair of toxic substances during the filtration of the air through the fabric. Integrirovannoi uniforms and linen are designed for continuous wear. After washing clothing and underwear need, as a rule, additional impregnation (impregnation). To protective clothing also includes linen soaked means against insects and mites.
In addition to the above types of protective clothing used in the army and the civil defence units, to provide special conditions of work of certain categories of personnel can be applied to other types of special protective clothing (anti-plague suit, anti-g suit pilots, scuba-diving suit and others).

Protective clothing military-style is designed for individual protection from the damaging effect of modern weapons and other adverse factors, occurring in the conditions of military work. It is manufactured from an insulating (air-water resistant) and filter (air-moisture-permeable materials.
For manufacturing protective clothing of insulating type used textile fabrics coated with rubber or synthetic macromolecular resins and synthetic film materials. Protective equipment of this type include: light protective clothing, protective overalls, raincoats, gloves, stockings, aprons and boots. These items can be used in varying completeness. Each kit includes a gas mask (see).
Light protective suit consists of a jacket with a hood, trousers with stockings, gloves and a cap (Fig. 4). Protective gloves are manufactured in summer and winter (insulated) variants. In a protective suit pants, jacket and hood structurally integrated into one (Fig. 5). Use also thinking of rubber gloves and rubber boots, put on socks (socks).
Light protective clothing and protective suit relate to special insulating O. hermetic type, designed for chemical, radiation and bacteriological intelligence, degassing, decontamination and disinfection of various objects for the performance of other works connected with the danger of electric droplet liquid and vaporous S, radioactive and bacterial aerosols.

Fig. 4. Light protective clothing: I - jacket with hood; II - pants-stockings; III - gloves; IV - liner; V - bag; 1 - neck valve; 2 - rubber loops that hold sleeves; 3 - ribbon securing stockings; 4 - shoulder straps; 5 - a half-belt, holding his shirt to the press.
Fig. 5. Protective suit: 1 - General view; 11 - liner; 111 - rubber boots; IV - gloves; 1 - the upper half-belt; 2 - hood; 3 - chest valve; 4 - the throat half-belt; 5 - sleeve, closing the glove; 6 - cuffs press, closing boots; 7 - zone; 8 - throat safety valve.
Fig. 6. Protective cloak of OP-1: 1 - side pegs; 2 - onboard holders of pegs; 3 - ribbon; 4 - half-belt sleeves; 5 - setting; 6 - ribbon; 7 - holders tabs; 8 - peg Central; 9 - rear tabs; 10 - the side tabs.


Protective cloak, stockings and gloves are combined protective kit, designed to protect the chemical attack of the radioactive fallout from the cloud of a nuclear explosion, when the action on the ground, infected OB, RV and the armed forces, special tests and sanitary processing. The design of protective cloak allows to apply it put in sleeves, in a Cape or overalls (Fig. 6). Protective wear stockings over shoes and trousers (pants), strengthen above and below the knee flaps and a waist belt - loops.
Protective apron complete with protective stockings and gloves can be used with degassing, decontamination and disinfection of military equipment and transport, special treatment of water and food, taking the wounded and sick, infected OB, RV or BS, i.e. when performing work in which the risk of secondary lesions precautions are small. This kit is recommended to use, as a rule, together with protective clothing filtration type.
Protective clothing filter type is a top Acting, underwear, Balaclava, impregnated (impregnated) special compositions. In recipes impregnations contain substances that sorbing S or neutralizing them. Textile materials on the basis of cellulose (cotton, linen, wool) can be given protective properties in relation to the light with a nuclear explosion and incendiary substances by processing them with special solutions that increase the resistance of the tissues to ignition, combustion and smoldering. In addition, O. and linen can impregnates substances that give the tissues insecticidal, hydrophobic and other protective properties, or set various properties. As a protective impregnation apply to substances which do not have konarskiego and General-resorptive toxic action, and do not alter substantially the basic hygienic properties of fabrics and clothes in General.
Insulating protective clothing hermetic cut, preventing natural ventilation pagodinho space and the evaporation of sweat, disrupts the normal heat exchange of a person. In winter time can have a significant dampening then Acting under the protective suit that can lead to hypothermia and respiratory diseases, but more dangerous overheating of the organism that may develop in individuals who perform physical work at outside temperatures above 20 degrees. Therefore the length of stay in insulating protective clothing regulated taking into account the gravity of the physical loading and meteorological conditions. So, when intense solar radiation and little wind continuous moderate safe when the outside temperature is 30 degrees and up to 20 minutes, when 25-29 OC to 30 minutes, 20-24 degrees for 50 minutes, 15-19 OC to 2 p.m., below 15 degrees up to 5 hours. The terms of stay in protective Acting increase by approximately one and a half times with light loads, the execution of the works in the shadows or in cloudy weather.
Depending on the external temperature under a light protective clothing or protective suit recommended to wear a different O.: at 10 degrees and above - year-old linen; from 0-10 degrees - year-old linen and uniforms; from 0 degrees to -5 degrees - warm underwear and winter uniforms; from -5 degrees to -10 OC warm underwear and padded jacket; below minus 10 Celsius - warm underwear, winter clothing and padded jacket.
The duration of the protective Acting at high ambient temperature can be increased to 2-3 hour., if over protective O. wear cotton overalls and periodically moisten it with water. Essential special training for work in individual protective Acting in hot weather.
To work in protective clothing carried out under the supervision of representatives of honey. service.
In the cases of the appearance of symptoms of overheating of the organism (see), you must immediately cease use of, a victim from an infected area, to carry out partial decontamination (disinfection), to remove the gas mask and protective O., pour the head and torso water, promote peace, and to provide drinking water. In severe cases, in addition, it is shown camphor injections, caffeine, physiological solution, if breathing has stopped - lobelin, adrenaline, artificial respiration.
Modern protective O. filter type retains hygienic properties of ordinary Acting, so it can be used for permanent socks.